Plastic Fasteners Catalog

ITW Fastex Plastic Fastener Manufacturer
HomeSite MapContact Us     




Push-In Clips To Push-In Clips List
Canoe® Clips


Canoe® Clips
A low cost replacement for screws and rivets. Clips snap into round holes securely holding in metal, plastic, and a variety of materials. Ideal for assembling gaskets, nameplates, and lightweight panels to other panels and components.

    View Specs Place your mouse on the part number for additional information.

Product Schematics




INSTALLATION: Fastener is pushed into hole,
hollow prong compresses, returning to its original
shape once it passes through hole.

Specifications
Part Number Head Style Panel Hole Diameter* Panel Thickness Range A Head Height B Head Diameter C Prong Length D
min max min max
254-080845-00-0101 Part Number: 254-080845-00-0101
Material: Nylon 66
Material Color: Natural
Special Properties:
Description: Canoe® Clips
BINDER 0.123 0.127 0.08 0.1 0.04 0.27 0.33
254-090301-00-0101 Part Number: 254-090301-00-0101
Material: Nylon 66
Material Color: Natural
Special Properties:
Description: Canoe® Clips
ROUND 0.135 0.14 0.06 0.07 0.06 0.3 0.33
254-090401-00-0101 Part Number: 254-090401-00-0101
Material: Nylon 66
Material Color: Natural
Special Properties:
Description: Canoe® Clips
ROUND 0.131 0.141 0.06 0.09 0.15 0.406 0.275
254-090501-00 ROUND 0.131 0.141 0.08 0.125 0.1 0.406 0.365
254-090501-01 ROUND 0.131 0.141 0.08 0.125 0.1 0.3 0.365
254-090601-00 ROUND 0.131 0.141 0.115 0.16 0.1 0.406 0.437
254-090601-01 ROUND 0.131 0.141 0.115 0.16 0.1 0.3 0.437
254-120601-00-0101 Part Number: 254-120601-00-0101
Material: Nylon 66
Material Color: Natural
Special Properties:
Description: Canoe® Clips
TRUSS 0.182 0.192 0.1 0.16 0.06 0.375 0.437
254-160801-00-0101 Part Number: 254-160801-00-0101
Material: Nylon 66
Material Color: Natural
Special Properties:
Description: Canoe® Clips
TRUSS 0.24 0.26 0.095 0.218 0.055 0.5 0.63
254-160801-01 TRUSS 0.24 0.26 0.095 0.218 0.09 0.875 0.63
254-160801-02 PAN 0.24 0.26 0.095 0.218 0.06 0.45 0.46

*NOTE - When installing canoe clips:
  1. It is desirable that the burr side of hole be opposite CANOE CLIP entry.
  2. Dimensions listed are nominal.
  3. The surface condition of the hole edge has a definite bearing on the ease with which a CANOE CLIP can be inserted and how well it will fit and hold.

    Indicated hole sizes are final i.e.: after painting, enameling, etc. For hole sizes that will provide the best combination of easy installation and secure fit, the following can serve as a general guide:
Surface condition Hole size
Porcelain Low end of indicated range
Enamel Slightly below middle of indicated range
Paint Middle of indicated range
Plastic Panel middle of indicated range
Raw Metal High end of indicated range


ITW Fastex®
ITW Fastex® - U.S.
195 Algonquin Road,
Des Plaines, IL 60016
Phone: 847-299-2222
Fax: 847-390-8727
ITW Fastex® - Asia
A4, No.3-2 K.E.P.Z.
Kaohsiung, Taiwan R.O.C.
Phone: 886-7-811-9206-10
Fax: 886-7-811-1795 / 811-0332
sales@itweba.com

Home | Product Catalog | New Products | Sitemap | Contact Us

Panel Fasteners & Plastic Clips | Rivets | Access Panel Fasteners | Bumpers - Self Adhesive & Snap-In
Wire Management Clips, Purse Locks, & Straps | Plastic Leveling Feet | Grommets | Electronics Fasteners, Supports, & Spacers
Capabilities | Cabinet Products | Furniture Solutions | Electronic Fastening Solutions & PC Applications
ISO & AS9100 Registration | RoHS | Appendix | Privacy Statement | Disclaimer | Terms & Conditions


This site created and maintained by American Web Page, L.L.C. (www.awpg.com).
Copyright © 2002 - 2012 American Web Page, L.L.C. All Rights Reserved.