These stranded wire UL and CSA recognized grounding clips attach easily over panel or hole edge top to achieve positive ground wire contact with panel, plate or frame. Wire contact is achieved by either quick connect terminals or insulation displacement. Wire stripping, soldering and termination not required. For 18 to 12 gauge stranded wire.

Blades cut through paint coating to provide metal-to-metal contact with the plate. Attaches with a screwdriver, no soldering or screw mounting necessary. Accommodates 14 or 12 gauge solid core wire.

Available in a wide variety of styles, PC board supports/spacers accommodate all of your serviceability and mounting requirements. Many standoff heights and fastening options are available. Different styles allow assembly from the top or bottom of the board for greatest convenience.

This spacer/support snaps into the PC board from the bottom. The rectangular hole mounting configuration keeps the support from rotating and the locking arm clips to the side of the board making removal and replacement of the PC boards easy, decreasing service time.

This unique PCB support was designed to provide a secure attachment between the PCB and chassis. On the bottom end the rivet fastening method is used to attach the support to chassis. On the top end, the edge mount attachment allows for the board to be snapped on securely, and also allows for the board to be removed. These supports come in two different standoff lengths and are manufactured in a tough natural nylon 66 material with a UL flammability rating of 94V-2.

Durable, attractive, non-conductive hole plugs match all your needs. Choose from many shapes, sizes and styles for temporary, permanent, functional, or cosmetic hole filling. Provides excellent dust protection for electronic equipment.