These front mounted grommets provide added thread engagement and increased bearing area. The non-conductive parts fully encapsulate metal screws, providing electrical insulation and protection against temperature/moisture transfer and exposed screw points. Accommodates variations in hole size and panel thickness. Available in three basic styles.

These are ideal when components are fastened from the opposite side of the panel. Snap-in grommet covers the screw point with an attractive, decorative head.

This is ideal for applications with a drilled or punched hole. A pin, part of the grommet, expands the prongs of the grommet as it is driven into the hole. This provides friction between the grommet and the inside of the hole, retains the grommet in the hole and prevents the screw from rotating in the hole after it's been driven. As the screw is driven, it pushes the pin ahead of it, expanding the prongs still further and locking the grommet securely in the hole.

This grommet snaps into a pre-punched square hole and provides the threads for screwing in metal glides. Eliminates costly weld nuts and welding operations. Accepts 5/16-18 and 3/8-16 threaded glide. Patented product.

One-piece, non-corrosive nylon, self-retaining blind screw receptacle that spreads the load over a wide area for strength and high load bearing capacity. Front snap-in. Insulates at fastening points, protects against electrolytic actions, eliminates cross threading.