Reduction of Hazardous Materials (RoHS).

ITW Fastex^® has contacted all its raw material suppliers concerning the compliance to the RoHS directive. Based on the information provided by our raw material suppliers the ITW Fastex^® material end-codes listed below are compliant with the RoHS directive.

The material end-code is listed at the end of each part number when purchased. Example part number 354-200102-00-5869.



Fastex Plastic Material end-codes:

0017	1615	2063	3852	3943	5614	6041	5907
0075	1757	2099	3856	3951	5801	6074
0078	1766	2637	3857	3952	5814	7102
0101	1837	3211	3866	3961	5869	8218
0103	1839	3745	3881	3962	5905	2629
1412	2030	3835	3935	5008	6023	3704
1610	2054	3841	3938	5601	6040	5538

W

03001A	03023D	04004	05004D	C3004D	H6004D	03141D03141	05012D03012
03001D	03026D	04004B	05625	C3082D	S6004D	04004D04004	06004B10004
03001F	03141D	04004D	06004D	C3634D	W8004A	05002B10001	H6004B10004
03004D	03440D	05001D	10004A	C6004D	WT625D	05004A15004	H6004DH6004
03004F	04001D	05002D	4Z004D	H4004D		05004D05004

Adhesive Backed Cord Clip product line. The part numbers in this product line end with a material end-code 9909 (Example part number 8511-28-00-9909). Both the plastic material for the clip and the foam adhesive components comply with the RoHS directive.

Latch product line. Both the plastic body and metal/plated spring components of the latch assembly comply with the RoHS directive.

Part numbers:	7800-02-9909	7804-01-9909
	7801-02-9909	7805-02-9909

Metals end-codes:

0010	0551C
0551YT	0555

If a material end-code of a product you purchase from ITW Fastex^®, either direct or through an Authorized Distributors, does not appear in the above listing please contact sales@itwfastex.com. Please include the full ITW Fastex^® part number and whom you purchased the product from (ie: Distributor name and address).

Updated: APRIL 2010